Product Description - Viking UP200 Gebrauchsanweisung

PRODUCT DESCRIPTION

PRODUCT DESCRIPTION
1) AC/DC OUTPUT INDICATOR: Press the "ON/OFF" bu�on to turn on the generator, the ba�ery status
LED indicator will light up, which means that the generator is currently on and the DC output is ac�va-
ted. To ac�vate the AC output, long press the "ON/OFF" bu�on. Keep the bu�on pressed un�l the "AC"
indicator lights up (
2) BATTERY CAPACITY INDICATOR: The first LED indicates charging. The first LED indicates the ba�ery
capacity status.
CONTROL
1) CHARGING THE GENERATOR
A. DC input. Connect the charging adapter to the mains and connect the JACK connector to the 12V DC
input. The DC output LED will start flashing and the charging LED will light up. The generator is fully
charged when the DC indicator LED stops flashing and starts to glow steady. The DC input can also be
used for solar panel charging (5-20V/3A 60W max.).
B. USB-C input. Connect the USB-C connector to the USB-C input of the generator and connect the
other USB-A connector to the charging adapter. Connect the adapter to the mains. For charging the
generator via USB-C input, select a charger with a range of 5V/2.4A; 9V/3A; 12V/3A;15V/3A; 20V/3A
and a total power of less than 60W to avoid damaging the device while charging.
2) CHARGING OTHER DEVICES
A. AC output: press and hold the "ON/OFF" bu�on un�l the AC output LED indicator lights up and
ac�vate the AC output. Open the AC output protec�ve cover and plug the plug of the device being
charged into the AC outlet.
The AC output has a rated power of 150W and a peak power of 200W. The power of the device being
charged must not exceed 150W. When charging from the AC output, the fan will automa�cally start to
cool and protect the generator from overhea�ng.
).
Nabíjení Kapacita baterie 0% -25%
1. ON / OFF bu�on
2. LED ba�ery status indicator
3. USB-A 1 output
(5V / 4.5A; 9V / 3A; 12V / 2A)
4. USB-C input / output
(5V / 2.4A; 9V / 3A; 12V / 3A; 15V / 3A;
20V / 3A)
5. USB-A 2 output
(5V / 2.4A)
6. AC output
(AC 230V / 50Hz)
7. Car jump starter
(12V / 300A)
8. AC output LED
9. DC output LED indicator
10. DC input / output
(Input: 16.8V / 1.5A; Output: 12V / 3A)
11. Fan
25% -50% 50% -75% 75% -100%