Main Components - DAY Useful Everyday 75510 Gebrauchsanweisung

Before use
Open the donut maker.
Wipe the hotplates with a damp cloth and
allow them to dry.
Close the donut maker and plug the
appliance in.
Allow the donut maker to heat up for a few
minutes. The appliance may emit a smell or
smoke. This will disappear after a short time.
The donut maker is now ready for use.
NB! Do not add fat to the non-stick coating,
as this may cause the donut not to bake
properly.

Main components

1. Upper housing
2. Power indicator
3. Ready indicator
4. Bottom housing
5. Power cover
6. Upper plate
7. Bottom plate
Use
Close the donut maker.
Insert the plug into the mains socket and
switch on the power.
The indicator light (2) and thermostat light
(3) come on to show that the donut maker is
on and is heating up.
Once the hotplates reach the correct
temperature, the thermostat light goes out.
The thermostat will go on and off so that the
donut maker can maintain the temperature.
Open the donut maker.
Pour donut batter into each whole in the
lower hotplate and close the lid to distribute
itself over the hotplate.
GB
15