Konig + Neurath JET.II Montageanleitung Seite 2

JET.II
ASSEMBLY INSTRUCTIONS
Putting your JET.II
together is easy
+ Insert the castors into the star
base ->
1 2
+ Place the starbase
2
the ground
+ Insert the gas spring
element consisting of the
4
seat, mechanism incl. backrest
support and armrests
+ into the
+ Then slot
3 4
starbase
2
+ Next insert the backrest
the backrest support
from above. Press the button
and push the backrest right
6
down until it locks into position
+ Once the chair is assembled,
move the backrest back and
forth through the full adjust-
ment range several times whilst
pressing release button
ensure optimum function.
+ Sit yourself onto the chair
so all elements are locked
in place correctly
+ Sit on the assembled chair and
push seat height adjustment
lever down as far as it will
7
go and hold in position for 3-5
seconds.
koenig-neurath.com
on
into the
3
into
5
4
to
6
5
6
4
3
2
1
Backrest
7
Seat height adjustment
Seat, mechanism incl.
backrest support and
armrests
Gas spring
Starbase
Castors