Timer Function - Hyundai IND 233 Bedienungsanleitung

Press again the „MENU" button to switch to mode HEAT with maximum power with a timer, the
display shows „0:00". Turn the dial to select the desired cooking time in minutes. After selecting
the cooking time will start counting down the remaining time. The default power is 1300 W
(plate ) or 1600 watts (plate
turning dial.
Press again the „MENU" button to switch to mode TEMP with cooking timer, the display shows
„0:00". Turn the dial to select the desired cooking time in minutes. After selecting the cooking
time will start counting down the remaining time. The default temperature is set at 240 ° C. After
the start of the countdown, you can change the temperature by turning the dial.
HEAT
• In this mode, the user can adjust the power output of the unit. You change the power by
turning dial.
• Power settings:
Plate
200 - 350 - 500 - 650 - 800 - 900 - 1000 - 1100 - 1200 - 1300 W
Plate
200 - 350 - 500 - 650 - 800 - 1000 - 1100 - 1200 - 1400 - 1600 W
TEMP - HEATING ACCORDING TO THE SET TEMPERATURE
The temperature sensor, located underneath the glass-ceramic plate, monitors the bottom
temperature of the cookware. The user selects required temperature and the thermostat
compares the selected temperature with the temperature of the bottom of the coockware.
When the selected temperature is reached, the power will be disconnected. When the actual
temperature of the bottom of the coockware is lower then the selected temperature, the power
will come ON again. This mode keeps the selected temperature in a thermal range (+-20°C).
This mode is in fact somewhat more comfortable and economic.
The pre-set temperature stage „240 °C" is selected and the device turns on (Temperature
stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C). You can change the settings at
any time, by turning dial.

TIMER FUNCTION:

The control „ " appears next to the display. 5 sec after setting the value the TIMER cooking
will start and time will be countdowned in one minute intervals. Control lights „
lights for all timer interval. Once the time is up, you will hear an acoustic signal and the device
automatically enters standby mode.
FUNCTION
Number
of presses
„MENU"
Function HEAT
set power
1300 W
1600 W
Control lights
). After the start of the countdown, you change the power by
1 x
TEMP
Set temperature
default 240 °C
P
2 x
HEAT + TIMER
Power and time
setting by dial
turns
°C
ENG - 24
" and „P" will
3 x
TEMP + TIMER
TEMP and time
setting by dial
turns
P +
°C +
4 x