Safety Instructions; Product Description And Specifications; Intended Use; Product Features - Bosch SmartphoneGrip BSP3200 Originalbetriebsanleitung

Safety Instructions

Read all the safety information and in-
structions. Failure to observe the safety in-
formation and follow instructions may result
in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future ref-
erence.
Read and observe the safety warnings and directions
u
contained in all the eBike system operating instruc-
tions and in the operating instructions of your eBike.
Do not allow your attention to be diverted from sur-
u
rounding traffic when using Bosch eBike components
and always ride with both hands on the handlebars. Al-
ways observe the applicable legal provisions in your
country for the permitted use of your bicycle in road
traffic. In particular, note that it is prohibited to pick
up or hold your smartphone in your hand in road
traffic.
Set the display brightness so that you can adequately
u
see important information such as speed and warning
symbols. Incorrectly set display brightness may lead to
dangerous situations.
The contact surfaces of the display holder may be-
u
come very hot (> 60 °C). Allow the contact surfaces to
adjust to the ambient temperature before you touch
them. This is particularly important when using a Smart-
phoneGrip.
Consult a doctor before using fitness app programs.
u
Fitness apps may cause people to overexert themselves
physically.
Always observe local restrictions for using electronic
u
devices.
Avoid operation near your body for extended periods.
u
Do not stand your bicycle upside down on its saddle
u
and handlebars if the SmartphoneGrip or its holder
protrude from the handlebars. This may irreparably
damage the SmartphoneGrip or the holder.
Do not use the SmartphoneGrip as a handle. Lifting the
u
eBike up by the SmartphoneGrip can cause irreparable
damage to the SmartphoneGrip.
Do not open the SmartphoneGrip. Opening the Smart-
u
phoneGrip may damage it beyond repair and void any
warranty claims.
Caution! When using the SmartphoneGrip with
u
Bluetooth® and/or Wi-Fi, interference can occur with
other devices and equipment, aircraft and medical
devices (e.g. pacemakers, hearing aids). Likewise, injury
to people and animals in the immediate vicinity cannot be
excluded entirely. Do not use the SmartphoneGrip with
Bluetooth® in the vicinity of medical devices, petrol sta-
tions, chemical plants, areas with a potentially explosive
atmosphere or on blast sites. Do not use the Smart-
phoneGrip with Bluetooth® in aeroplanes. Avoid opera-
tion near your body for extended periods.
Bosch eBike Systems
Product Description and
Specifications

Intended Use

The Bosch SmartphoneGrip is designed to hold and charge a
smartphone on the handlebars of a Bosch eBike system.
In addition to the functions shown here, changes to software
relating to troubleshooting and functional modifications may
be introduced at any time.
The SmartphoneGrip is suitable for cycling on reinforced
paths without jumps and with few ledges (< 15 cm) at aver-
age speeds of between 15 and 25 km/h, for example on as-
phalt roads, country paths, paths reinforced with gravel or
sand, and reinforced woodland paths.
In case of improper use, there is a risk of the smartphone
coming loose from the holder, falling down and becoming
damaged as a result. There is also a considerable risk of an
accident if the smartphone falls out.

Product Features

The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
All illustrations of bike parts except for the drive unit, Smart-
phoneGrip (including operating unit), speed sensor and the
corresponding holders are a schematic representation and
may differ on your eBike.
(1) Front retraining bracket, movable
(2) Rear retaining bracket, fixed
(3) USB port with USB cap
(4) Release mechanism
(5) SmartphoneGrip mount
(6) Snap-in hook
(7) Socket contacts
(8) SmartphoneGrip contacts
(9) Status LED
(10) Inductive charging coil
(11) Display mount fastening screw
(12) Removal blocker
(13) Keypad lock
a)
(14) Hex key
a)
(15) Smartphone
(16) Adapter tray
a) Not included in the scope of delivery

Technical Data

SmartphoneGrip
Product code
Charging capacity via USB
port
English – 1
BSP3200
W 5 W (1 A at 5 V)
0 275 008 3SG | (28.02.2022)