Lionelo Amber Bedienungsanleitung Seite 12

HOW TO ASSEMBLE CAR SEAT
(APPLIES TO 3in1 SET)
The adapters are compatible with the following products:
Lionelo (Astrid, Mari Carrier, Greet Carrier)
1.
Car seat parts are presented in fig. 21.
2.
Slide adapters in relevant stroller frame spots until you can hear a click and
connectors are locked up. Pay attention to R and L marks.
3.
Put the car seat in stroller frame until you can hear a click and adapters are
locked up (fig. 22).
4.
To detach the car seat when necessary, disconnect the car seat from adapters.
5.
Press the button (fig. 23) to remove the connector from stroller frame.
6.
A suitable assembly is presented in fig. 24.
HOW TO FOLD AND ASSEMBLE CARRYCOT
The child can be transported in the carrycot (fig. 30).
1.
Carrycot parts are presented in fig. 25.
2.
Put metal bars into carrycot brackets (fig. 26), as showed in fig. 26A.
3.
Hide side bars by fastening Velcros (fig. 27).
4.
Put the mattress base and mattress into the carrycot (fig. 28).
5.
To fold the carrycot, detach Velcros covering side bars of the carrycot (fig.
29A) and pull out metal bars from carrycot brackets (fig. 29).
How to assemble carrycot on stroller
1.
Slide in adapters standing out of carrycot in relevant spots on stroller frame
until you can hear a click. Push the carrycot as showed by arrow in the
figure (fig. 31).
2.
Suitable assembly is presented in fig. 32.
3.
To disassemble the carrycot, press both release buttons at a time (fig. 33)
and lift the carrycot (fig. 34).
How to clean and maintain
1.
To ensure the longevity of the product, it is advisable to clean the stroller
frame, wheels and flexible parts with a preservative grease.
2.
Remove dust and sand from the wheels and stroller frame regularly. You can
clean these parts with a wet cloth and soft washing agent.
EN ‑ 12 ‑