How To Assemble - Lionelo Kori Bedienungsanleitung

•
Before the ride, make sure all elements have been properly fixed.
•
Before the use, make sure all locking mechanisms have been locked.
•
To assure stability of the product, do not overload it. Do not hang or place
any heavy items on the handlebars/parent's handle as they may cause the
product to collapse and the child to get injured.
•
Do not store the product in a place in which it may be exposed to high
temperature and humid air.
•
When riding, avoid bumpy roads.
•
If the bike is damaged in any way, stop using it immediately and contact
the manufacturer.
•
The child must not stand up when using the bike.
•
The child must always be secured with belts.
•
Keep the product away from fire and sources of heat

How to assemble

A.
Fix rear wheels in dedicated spots on the rear part of the crossbar. Make sure
the wheels have been properly fixed – try to pull them out (fig. 1)
B.
Press the clip on the shank of the front wheel and fix this element on the
front part of the crossbar (make sure you mount the wheel in accordance
with mudguard marking). Put the handlebars on the outstanding shank
of the front wheel. If you can hear a „click", it means that fixing is correct
(fig. 2 and 3).
C.
Fix the rear basket and tighten it up with the crossbar nut (fig. 4 and 5).
D.
Place the seat on the crossbar – put it through the outstanding metal shank.
Tighten the shank up on the other side of the crossbar with a bolt (fig. 6 and 7).
E.
Slide bow fasteners in corresponding spots on both sides of the seat until
you can hear a „click". Connect two tips of the bow by pulling it through
the crotch protection (fig. 8 and 9). Make sure the belts have been properly
locked in the seat.
F.
Fix the sunshade on seat brackets on both sides. In order to adjust the inclination
of the sunshade, pull the brackets evenly and set the inclination angle.
G.
Put the parent's handle into the metal shank standing out in the rear part
of the crossbar and secure with the interlock at the bottom of the handle.
H.
Fix the footrest on both sides of the front wheel with the use of fasteners
(fig. 13).
EN ‑ 6 ‑