How To Assemble - Lionelo Bart Tour Bedienungsanleitung

falls or collisions resulting in bodily injuries to user or other persons.
•
Keep the plastic packaging out of reach of children as it poses a suffocation
risk.
•
Before every use, make sure the bike has no damage, loose connections
or missing components. Do not use the product if any component is
missing or the product is damaged. This being the case, contact the
manufacturer's authorized service center.
•
Keep the product away from fire.
•
Do not drag the bike behind the car or other vehicle.
•
Keep the product away from sources of heat, high temperatures, hot
surfaces, sources of ignition, naked flame, oil and sharp edges.
•
Store the bike in a dry place.
•
Do not use the product in unfavorable weather (e.g. frost, rain, snow,
black ice).
Product description (fig. 1)
1.
Handlebars grips
2.
Handlebars with shank hole
3.
Saddle
4.
Front fork
5.
Crossbar
6.
Rear wheel
7.
Front wheel
8.
Wheel clamping ring
9.
Saddle clamping ring

How to assemble

The bike must be assembled, disassembled and adjusted by an adult only.
1. Handlebars (fig. 2)
Insert the shank with a cap (marked as B in fig. 2) into the handlebars
EN ‑ 4 ‑