How To Assemble; How To Use - Lionelo Alex Bedienungsanleitung

•
The safest areas for using the bicycle are those with little or no vehicular traffic, such
as private areas,playgrounds, schoolyards, and school playgrounds.
Product description (fig. 1)
1.
Anti-skid arms
2.
Handlebars
3.
Saddle
4.
Front fork
5.
Crossbar
6.
Rear wheel
7.
Front wheel

How to assemble

1. Handlebars (fig. 2)
Remove the handlebars fixing ring (10) and front wheel fork cap (14) from the front fork
(4). Insert the front fork with wheel in the bike crossbar hole. Put these items back on the
protruding fork shank in the following order: front wheel fork cap (14) and handlebars fixing
ring (10). Next release the nut on the ring (14) and insert the handlebars (2) in the front
fork. Adjust the height of the handlebars to the child's height - handlebars depth marker (9)
cannot be visible, must be inside the crossbar. Tighten up the nut on the ring (14) and cover
it (8). Once the process is completed, make sure the handlebars have been fixed securely. If
not - tighten up the nut on the ring until the stability is acceptable.
Note! When assembling, make sure the front fork with a wheel is assembled in the crossbar
properly. The bike should be assembled, disassembled and adjusted by an adult only.
2. Saddle (fig. 3).
Insert the saddle pipe in the saddle hole in the crossbar (12). Adjust the saddle height to
the child's height - saddle depth mark (11) cannot be visible, must be inside the crossbar.
Tighten up the nut on the saddle fixing ring (13). Once the process is completed, make sure
the saddle has been fixed securely. If not, tighten up the nut on the ring until the stability
is acceptable.

How to use

It is necessary to sit on the saddle, grab both arms of the handlebar
properly and then push alternately feet against the ground. When the child gathers speed
on the bike, it must lift feet to ride freely. This way the child can learn to keep balance. To
turn, the child must turn the handlebars in a proper direction and keep its balance. To brake,
ground must be touched with feet.
EN
8.
Masking collar
9.
Safety mark under handlebars
10. Clamping ring
11. Safety mark under saddle
12. Saddle hole in crossbar
13. Saddle fixing ring
14. Front wheel fork cap
‑ 4 ‑