Herunterladen Inhalt Inhalt Diese Seite drucken

Lionelo Annet Plus Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
How to assemble the bow-shaped handle (5):
A.
Push the guides of the bow-shaped handle inside the grips.
B.
Press the bow-shaped handle until you can hear a click.Fasten the extra
crotch strap on the bow-shaped handle. The additional crotch strap must
always be fastened with the bow-shaped handle.
C.
Press the buttons located from the inside to release locks and remove the
bow-shaped handle.
How to unfold the sunshade (6):
Pull the sunshade forward to unfold it.
How to adjust footrest and backrest (7):
A.
Footrest adjustment: Press buttons on both sides of the footrest and lift it
or slide down, as desired, then release buttons.
B.
Backrest adjustment: Lift the lever in the back of the backrest, next adjust
the backrest and release the lever.
Belt height adjustment (8):
To adjust the height of the shoulder belts to the child's height, slide the belt buckles
out of the slots of the adjustable positions. Pass them through the holes and turn
the buckle. Outgoing child's straps should be at shoulder height.
How to use safety belts (9):
Join the belt (A) and the belt (B) together with a quick coupling. Do the same on
the other side. Insert the belt connector (C) in the handle (D). Do the same on
the other side. To adjust the belts, slide the adjustment handle (E) up or down
by tightening or releasing the belt. To disassemble safety belts, slide the buckle
through the opening in the seat. To assemble, put the safety belts back again.
How to use the mosquito net (10):
There is a mosquito net container at the bottom of the leg rest (A).Unzip it and
take the mosquito net out (B). Put the mosquito net on the stroller (C).
How to disassemble the stroller (11):
Fold the sunshade. Next lift assembly buttons on both sides of the handle, then
‑ 7 ‑
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis