phone or cause a safety risk.
13.
Batteries must be used with caution.Do not attempt
to disassemble the battery yourself. Do not destroy
the batteries and chargers. Never use a battery or
charger that has been damaged. Keep batteries away
from electronic objects.You should not expose the
batteries to very low or very high temperatures (below
0°C or above 45°C). It is recommended to recharge the
battery at a room temperature between 5°C and 25°C.
To optimise battery life, only use the WIKO battery and
charger supplied in the box. Incorrect use of the battery
or replacement with an incorrect type of battery may
cause fire, explosion or other risks. Dispose of used
batteries according to the instructions.
14.
Shocks and impact: Handle and use your phone with
the utmost care.Protect your phone: shocks and impact
may damage it. Some parts of your phone are made
from glass and might break if the phone is dropped or
is subject to severe impact. Avoid dropping your phone.
Do not touch the screen with sharp objects.
15.
Electric shock: Do not try to dismantle your device
as there is a very real risk of electric shock.
16.
Maintenance: If you want to clean your handset,
use a dry cloth (do not use a solvent, such as benzene,
or alcohol).
17.
Recharge your phone in a well ventilated area. Do
not recharge your device when it is resting on a soft
surface.
Damage to magnetic strips: Keep your phone away
18.
from credit cards as they may damage the data on the
magnetic strips.
19.
Do not use the mobile phone in an environment
at too high or too low temperature, never expose
your mobile phone to direct sunlight or too wet an
environment. The suitable temperature for the phone
is -10°c to +45°c, the maximum charging temperature
declared by the manufacturer is +40°c.
20.
Due to the used enclosure material, the GSM mobile
phone should only be connected to a USB Interface of
version 2.0 or higher. The connection to so called power
USB is prohibited.
21.
The socket-outlet should be near the equipment and
easily accessible.
22.
This charger is for indoor use only, the charger type
is TN-050100E4A, output voltage/current is 5.0V/1.0A.