CSL RMP-900 Kurzanleitung Seite 8

4. Start-up
Take the device out of the packaging and remove all packaging material. Then
connect the microphone to a USB port on your computer. The device is now ready
for use.
4.1 Muting the Microphone
The "Mute" switch allows you to mute and unmute the microphone.
4.2 Adjusting the Microphone Volume
On the bottom of the device are the "Decrease volume" and "Increase volume"
buttons. With these buttons you can adjust the microphone volume as desired.
5. RBG LEDs
An RBG mode button is integrated on the bottom of the device. Press the button
to change the RBG mode.
6. Windscreen
8
The microphone can be
equipped with a windscreen
(pop screen). Attach the wind-
screen as shown in the picture.
Please note that the wind-
screen only provides limited
protection against wind influ-
ences or blowing!
English