13463-5 (Constructional Safety „Ex c").
For electrical equipment regarding gas the MANOCOMB-IP65/XD complies
with norms EN 60079-0 (General Requirements); EN 60079-11 (intrinsically
safe „Ex i"); and regarding dust norms EN 61241-0 und EN 61241-1.
Furthermore you have to observce that when used in gas igniton endangered
atmosphere the MANOCOMB-IP65/XD is suitable for Device Group II, Category
2 (zone 1), protection type c (Constructional Safety „Ex c") and Temperature
Class T1...T6 with ambient temperature.
When used in dust ignition endangered atmosphere the MANOCOMB-IP65/
XD is suitable for Device Group II; Category 2 (zone 21), IP-protection type IP65
with a maximum permissable ignition temperature on the enclosure surface
of 135 °C.
•
Before bringing into service make sure all seals, threads and plugs are
tight to ensure neither media can leak out nor any liquids can damage
the electric contacts.
•
Where applicable norm VDE 0105 part 9 has to be taken into considera-
tion when operating electrical machines.
While in service
If the device is not properly mounted, other parts of the machine or human
beings could be damaged/injured due to uncontrolled movements of the de-
MANOCOMB®-IP65/XD Operating Instructions
vice. Make sure the device is properly mounted.
Cleaning the device
Never use solvents or harsh detergents.
Clean only with a slightly moist cloth to prevent electrostatic charge within
ignition endangered areas (Directive 1999/92/EC ATEX 137), use only water
and if necessary a mild detergent.
Disposal
Dispose the device in accordance with the regulations in your country.
3.
Scope of supply
Delivery includes:
•
1x
MANOCOMB-IP65/XD Pressure Switch
•
1x
operating instructions
•
if ordered/specified connectors (either installed or as an accessory pack)
NOT included:
mounting screws, mounting bracket, process-side gaskets/seals or switch am-
plifier or any other accessory
Above mentioned components are available individually or as an complete
accessory kit.