Safety Measuments; Overheating Protection; Cleaning Instructions - Shx Shx20Skv2001 Bedienungsanleitung

Please pay attention to the information on setting up the device in the safety instructions.
The SHX convector is equipped with a protective device that protect the device and is designed
to prevent a fire.
Please note that neither mechanism is an auto stop or other comfort function. Always switch
the device off, pull out the mains plug and wait until the heater cools down before you move,
clean or store the device.

OVERHEATING PROTECTION

If there is any risk of overheating (e.g. cover of the device, mains overload ... ..), the built-in
overheating protection switches the device off.
As soon as the device cools down, the device automatically switches on and continues as
before.
A common cause of overheating are deposits of dust or lint in the device. Therefore, clean
the device regularly and remove these deposits with a vacuum cleaner.
Before cleaning the device, switch off the heater, pull out the mains plug and then wait
until the device has completely cooled down.
Cleaning the casing:

Clean the device by wiping it with a soft, damp cloth and afterwards wipe it dry.

Do not dip the device in water or splash it with any other liquid.

Do not use gasoline, alcohol or solvents for cleaning the device.

Do not spray insecticides or similar means on the device.

Do not use the device in rooms with high humidity.

DO NOT COVER THE DEVICE – RISK OF FIRE!
WARNING
SAFETY MEASURMENTS
WARNING

CLEANING INSTRUCTIONS

WARNING
Seite 15 von 18