Sharp HT-SB500 Bedienungsanleitung Seite 25

Connecting a digital tuner, etc.
Connect to the digital tuner, etc. using an optical digital audio
cable or a coaxial digital audio cable.
To select DIGITAL 1 (optical input) or DIGITAL 2 (coaxial
input) function:
On speaker: Press FUNCTION button repeatedly until "D1" or
"D2" is displayed.
On remote control: Press DIGITAL 1 - 2 button repeatedly to
select "D1" or "D2".
To coaxial digital audio
output socket
To the TV (video)
Coaxial digital audio cable
(commercially available)
To OPTICAL
input socket
Speaker
Note:
When connecting with an optical digital cable, set the digital
output of the digital tuner to PCM. Refer to the operation manual
of the digital tuner.
HT-SB500
ENGLISH
To optical digital
audio output socket
Optical digital
audio cable
(commercially
available)
To COAXIAL
input socket
E-12