Inhaltsverzeichnis
Werbung
WALL MOUNT FOR FLAT SCREEN
Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar
products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
EN
We recommend keeping the original packaging of the product, invoice and warranty certificate at least for the time the warranty is valid.
When shipping the product, we recommend using the original packacking that the product was delivered in that will provide the best
protection for it from being damaged during transport.
1
Warning
„ The wall or the surface used for securing the mount must have sufficient strength and maximum load to secure the weight of the
mount, the screen and other accessories.
„ When installing the screen, use an assistance of another person.
„ During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed screen or
significantly decrease the maximum load of the mount.
„ This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed screen.
„ Check the stability and safety of the mount at least every three months.
2
Specifications
„ colour: black
„ quick and easy assembly
„ screws and concrete anchors included
„ full-motion wall mount
„ fits most 13"-37'' flat panels
„ VESA 75x75, 100x100, 100x200, 200x200 mm compliant
„ swivel 180º
„ extend from: 56-308 mm
„ max. load capacity: 25 kg
CMH-2012-BK
USER MANUAL
Werbung
Inhaltsverzeichnis
