Before Using The Device - Jean Louis David little waver JLD-1807 Bedienungsanleitung

If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified per-
sons in order to avoid a hazard.

BEFORE USING THE DEVICE

- Remove all packaging.
- Clean the device using a slightly damp cloth. Dry the device.
- Fully uncoil the power cable.
1 - Plug the appliance in. To activate the appliance, slide the «ON/
OFF» button to position «ON».
2 - The Little Waver reaches its unique and maximum temperature
of 200°C in few minutes.
3 - Put one hair strand between the waver plates (at the roots),
close the plates for 5 seconds, then open the plates. A wave appears
immediately on your hair. Repeat the gesture to the ends.
4 – To shut the appliance off, slide the «ON/OFF» button to po-
sition «OFF».
Switch off and unplug the device, then allow it to cool.
Remove any hair that may have been left on the device.
Clean the device using a slightly damp cloth and then dry it.
WARNING! Do not immerse the device and/or its power cable in
liquid: risk of short-circuit or electric shocks.
This symbol, displayed on the product or on its packaging,
indicates that this product complies with the European
Directive 2012/19/EU and must not be disposed of with
household waste.
It must be taken to an appropriate collection point for recycling
electrical and electronic equipment.
By ensuring that this product is disposed of in an appropriate way,
you will be helping to prevent potential harmful consequences for
the environment and human health.
Recycling materials will help to conserve natural resources.
OPERATION
CLEANING
6