Clatronic CDP 602 Bedienungsanleitung, Garantie Seite 33

5....-05-CDP 602
BBS (BASS BOOST): increases the bass sound. Press repeatedly to switch bet-
PROG:
STOP:
MODE:
Programmed Play
1. Press the PROG key.
2. PROG and „00" (track number) flashes on the display. The memory slot number
can be seen on the right.
3. Use theI
the PROG button again.
4. The display changes to memory slot 02.
5. Repeat the procedure until all the desired tracks are selected. If the SKIP -/+
buttons are pressed, the order in which the tracks are stored is displayed.
6. Press the
pause briefly the playback.
7. Press once the
8. To resume the playback of the program press first the PROG key once and
then the
9. To delete the program, press the STOP key twice (The machine switches off) .
The device stops automatically once the entire sequence of programmed tracks is
completed. The programmed sequence remains in the memory until the CD is
taken out of the CD deck or until the device is switched off.
Downloaded from www.Manualslib.com
15.04.2004
ween BOOST 1 and BOOST 2
See under "Programmed Play".
The CD is stopped. By pressing once again, the unit is swit-
ched off.
The following functions can be selected with the MODE key:
Press once =
Press a second time = „
Press a third time =
Press a fourth time = The word „SHUFF" appears in the
Press a fifth time =
/ I SKIP-/+ buttons to select the desired track and then press
/ II PLAY/PAUSE key. The playback starts. Press this button to
STOP key to stop the playback while retaining the program.
/ II PLAY/PAUSE key.
manuals search engine
12:08 Uhr Seite 33
„ 1": the current track is repea-
ted continuously.
ALL": the whole CD is played
continuously.
Then press the
„INTRO": All tracks are played for
ten seconds. The word „INTRO"
appears in the display.
display (during playback). If the
II button is pressed, all tracks are
played back in random order.
all the functions are reset. The nor-
mal play mode is resumed.
GB
/ II button.
/
33