Yealink SIP-T58V Schnellstartanleitung Seite 7

6. Connect the AC power or PoE, as shown below:
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
Note:
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may
cause the damage to the phone.
7. Connect to the network, as shown below:
You have two options for network connection. You can select one of them according to the current o ce environment.
a) Connect to the wired network:
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ
Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
Note:
If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
b) Connect to the wireless network:
1) Swipe down from the top of the screen to enter the control center.
2) Tap Settings->Basic->Wi-Fi.
3) Tap the radio box in the
On
The phone will automatically search for available wireless networks in your area.
4) Select an available wireless network from the list of networks.
5) If the network is secure, enter its password in the
6) Tap to connect to the wireless network.
Connect
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
eld.
Wi-Fi
Password
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
IEEE 802.3af compliant
PoE Hub/Switch
PC
PC Connection
(Optional)
Ｄ Ｃ ５ Ｖ
Ｐ Ｃ Ｉ ｎ ｔ ｅ ｒ ｎ ｅ ｔ
eld.
Power Adapter
(DC 5V)
E
N
G
L
I
S
H
3