Inklang AYERS Center Bedienungsanleitung Seite 12

english - EN 5
BURN IN – 15 HOURS OF OPERATION REQUIRED
During the burn-in phase there are subtle differences in the reproduction quality of the speakers.
If it has been stored in a cool environment, it will take some time for all compCenternts, especially the materials used to suspend the chassis, to have their
optimal mechanical properties.
Around 15 hours of operation are required before the mechanical parts can fulfill their function as specified in the design.
MAINTENANCE – JUST DUST IT OFF AFTER THE INITIAL CLEANING
A - Enclosure surface
The surface of the enclosure of your Center usually only needs to be dusted. Use a soft and clean duster for this.
Clean the speaker the first time after placing it. Fingerprints were created on the housing through the installation and movement. These can be removed with
a standard glass cleaner. Spray the glass cleaner on a soft, clean cotton cloth and carefully wipe off the dirt.
B - Speaker membranes
Please also remove dust on the membranes from time to time. A soft cotton cloth is suitable for this, with which you carefully wipe the entire membrane.
A clean make-up brush is also suitable for cleaning.
UNPACKING SET UP CONNECT BURN IN MAINTENANCE WARRANTY