Language Selection - Battery Controller X-PRO 36 Benutzerhandbuch

SELECTION MENU
BC X-PRO 36 is provided with a push-button panel that allows to select the operating mode, the related
parameters and the display language.
To enter the selection menu, keep pushed the "ON/OFF - SELECT" button for 5 seconds.
NB: every time you turn on BC X-PRO, it is necessary to wait for the initialization to be complete before
entering the menu.
Menu items:

Mode: it allows to choose the operating mode between Battery Charger and Power Supply.

Safety: it allows to set up several safety parameters for battery charging (battery test, maximum
Ah, maximum charging time)

Language: it allows to select the display language.

Showroom: Showroom: it allows to set the automatic restart in both Battery Charger and Power
Supply modes (exception for Power Supply mode with 12.8V output voltage selected).
To move between the menu and submenu items, use the arrow keys and confirm the choices with the
"ON/OFF - SELECT" button. If no key is pressed for 40", the device automatically exits the selection mode
and restarts with the previous configuration. It is possible to exit the menu at any time without confirming
the choices, keeping the "ON/OFF - SELECT" button pressed for 5 seconds.
OPERATING MODE – BATTERY CHARGER
In Battery Charger mode, BC X-PRO 36 is equipped with different
charging algorithms for different types of 12V starting batteries.
Before connecting the device to the battery, make sure to
correctly select the battery type and the maximum charging
current, depending on the battery to be recharged (follow the
instructions in the following paragraph).
The following battery types can be selected:

STD/MF: it executes an automatic multi-cycle charging
algorithm suitable for the recovery, charging, desulfation
and maintenance of all lead-acid traditional (with liquid
electrolyte) and sealed starting batteries (maintenance-
free and gel batteries). If it is necessary to recharge a
traditional battery, check the electrolyte level and fill up to the level recommended by the battery
manufacturer, if necessary.

LANGUAGE SELECTION

You can select the display language of the BC X-PRO 36 from 6
different languages. Proceed as follows:
1. Press and hold the "ON/OFF - SELECT" button for 5 seconds
to access the menu.
2. Press the arrow keys until you reach Menu: Language. Press
"ON/OFF - SELECT" to confirm.
3. Select the desired language with the arrow keys: ENGLISH
– ITALIANO – PORTUGAL – ESPANOL – DEUTSCH –
FRANCAIS
4. Press the "ON/OFF - SELECT" button to confirm the
selection.
WARNING
When using the BATTERY CHARGER
mode, select a maximum charging
current equal to one tenth of the
battery capacity in Ah or to the
value immediately higher in the
scale of the selectable values - ex:
for a battery with a capacity of 80
Ah, maximum current 10.0 A
(except lithium batteries).