Auto Mode; Sleep Mode - Hagen HA-7000R Handbuch

D. Drying your room
Press MODE button on the control panel or remote control, the LED of DRY
operation lights up. The fan speed is unable to select. User should connect the
hose to the drain outlet at the bottom of the unit.
Note: In this mode, the fan speed switches over to low speed and cannot be
selected.
E. Auto mode
In AUTO mode the COOL, HEAT and FAN mode will be regulated depending on
the room temperature and the target temperature.
Press MODE button repeatedly until the LED of AUTO operation lights up.
The unit starts with 23℃ target temperature as default.
1. At a temperature of ≥ 24℃ , the unit operating at COOL mode.
2. At a temperature between 22℃ and 24℃, the unit operating at fan mode.
3. When the room temperature ≤ 22℃, the unit operating at heat mode.
4. Once the operating mode is selected and stay on, the unit will cycle on and
off to maintain the temperature level.
F. Sleep mode
The sleep mode can be activated when in cool mode and heat mode.
In cool mode :

After 1 hour the preset temperature is increased by 1 ℃, after another hour
the preset temperature will again be increased by 1 ℃.
In heat mode :

After 1 hour the preset temperature is decreased by 1 ℃, after another hour
the preset temperature will again be decreased by 1 ℃.
Then the temperature is kept constant for 10 hours. And all the indicators dim to
dark. The fan speed may switch over to low speed for silent operating and cannot be
selected.
19