Power I/O - Matrix Vision BVS CA-SF2-Serie Betriebsanleitung

BVS CA - SF2 - _ _ _ _ _ _ - _ _ _ _ _ _ - XAS2
3 PRODUCT DESCRIPTION

3.5.1 Power I/O

www.matrix-vision.com www. matrix-vision.com
The BVS Industrial Camera is powered via the Power I/O plug which additionally pro-
vides digital I/Os:
•
Two inputs as optocoupler (3...24 V)
•
Four outputs as optocoupler (.. 24 V and 7 mA)
12-pin M12 socket, A-coded
Pin Description
1
2
3
4
5
6
7
8
9
10
11
12
1
The BVS Industrial Camera can be powered externally with following specs:
•
Input voltage range of 11...25 V DC (typical); min. 10 V to max. 30 V.
•
The power supply is protected against burst (EN 61000-4-4), surge (EN 61000-4-5),
and polarity inversion.
•
Internal short circuit protection by 1.5 A slow blow fuse.
The USB power cannot be accessed via the I/O connector (this is prevented by a diode).
Function
PWR_IN- Ground
/GND
1
PWR_IN+ 11...25 V power supply
Opto DigOut3 Digital output via optocoupler galvani-
cally isolated
Opto DigIn0 Digital input via optocoupler galvanically
isolated
Opto DigOut2 Digital output via optocoupler galvani-
cally isolated
Opto DigOut0 Digital output via optocoupler galvani-
cally isolated
Opto GND Ground for optocoupler
RS232 RX RS232 receiver
RS232 TX RS232 transmitter
OUT_V+ Power for the outputs
Opto DigIn1 Digital input via optocoupler galvanically
isolated
Opto DigOut1 Digital output via optocoupler galvani-
cally isolated
17