2)
Checking the threads of the castellated nut and of the tie-rod:
Remove the nut cover (14), split-pin (9) and the castellated nut (1). Check the
condition of the threads of the nut (1) and of the tie-rod (3). In case there are
any signs of play or seizure the parts must be replaced immediately;
6
3)
Wear check:
Check that the wear of the hook (13) is within the recommended limits shown in
the figure;
HOOK COUPLING UN 76
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
Ø 54 min UN763-764
Ø 61 min UN766
Ø 56,5 max UN763-764
Ø 63,5 max Un766
49 max
PAG.
18/32
CHAP . 4
REV. 00
3