V. Orlandi UN 76 Bedienungsanleitung Und Wartungsanleitung Seite 48

After the first 500 Km of use:
Check that the torque of the bolts (10) of the coupling flange (6) is within the torque
indicated in point 1 in chapter 2 INSTALLATION, page 10/32
After the first 3000 Km of use:
1)
Check that the torque of the bolts (10) of the coupling flange (6) is within the
torque indicated in point 1 in chapter 2 INSTALLATION, page 10/32;
Check that the tightness of the castellated nut (1) is within the torque indicated in
2)
point 5 in chapter 2 INSTALLATION on page 11/32;
Every 15000 Km:
Check that the torque of the bolts (10) of the coupling flange (6) is within the
1)
torque indicated in point 1 in chapter 2 INSTALLATION, page 10/32;
Check that the torque of the castellated nut (1) is within the torque indicated in
2)
point 5 in chapter 2 INSTALLATION, page 11/32;
Oil the moving parts of the coupling.
3)
1
4)
Check that the coupling works correctly by opening and closing it repeatedly
with the operating handle (12) following the instructions in point 1 and 2 in
chapter 3.1 COUPLING UP on page 12/32 and in point 4 in chapter 3.2.
UNCOUPLING on page 14/32.
Attention! Risk of a limb injury.
HOOK COUPLING UN 76
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
12
3
PAG.
16/32
CHAP . 4
REV. 00
13