Yealink SIP-T23P Schnellstartanleitung Seite 6

E
N
G
L
2. Connect the handset and optional headset, as shown below:
I
S
H
Note: The headset should be purchased separately.
3. Connect the network and power, as shown below :
You have two options for network and power connections. Your system administrator will advise you which one to use.
Note: The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the third-party
power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend
that you use the Ethernet cable provided by Yealink.
If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the hub/switch is
PoE-compliant.
Startup
After the IP phone is connected to the network and supplied
with power, it automatically begins the initialization process.
After startup, the phone is ready for use. You can configure the
phone via phone user interface or web user interfafce.
2
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
IEEE 802.3af compliant
PoE Hub/Switch
Power Adapter
(DC 5V)
Welcome
Initializing... please wait
PC Connection
(Optional)
PC
PC
PC Connection
(Optional)