Checking Parts; Safety Instructions - Laserworld ES-100G Bedienungsanleitung

Manual: ES 100 G / 600 B

Checking Parts

Please make sure the following parts are included:
1 x Laser projector
1 x Power cable
1 x User manual
DANGER LASER RADIATION!
Avoid direct eye exposure!
Laser radiation can cause eye damage and/or skin damage
All protective measures for a safe operation of this laser

Safety instructions

If the device has been exposed to great temperature changes, do not switch it on immediately.
Condensation water may damage your device. Leave the device switched off until it has reached
room temperature.
The laser must only be used for shows. Any operation has to be attended and supervised by a skilled
and well-trained operator.
Never leave this device running unattended and keep it away from children and unauthorized
persons.
Keep away from heaters and other heat sources. In order to safeguard sufficient ventilation, leave 50
cm of free space around the device.
Never direct the laser beam to people or animals.
CAUTION LASER DIODE: If you open the device for cleaning, always disconnect from mains!
HEALTH HAZARD! Never look directly into the light source, as sensitive persons
may suffer an epileptic shock!
These lasers are considered a definite eye hazard, particularly at the higher power levels, which
WILL cause eye damage. Warning labels and aperture labels are affixed to the laser.
Installation safety
Prior to installation and operation of the laser, the paths of the beams and effects should be
considered, particularly with respect to how they will reach the audience. If direct audience scanning
is desired, then the laser energy in the effects needs to be considered to decide if the effects are
safe for direct viewing. Always ensure that the maximum permissible exposure (MPE) is not
exceeded in the area accessible to the public. The laser must be installed in a way, that minimum
distances and heights ensure that the MPE is never exceeded in the public area. When audience
scanning is performed, an operator has to be present. An easily accessible emergency switch has to
be installed. When setting up the laser, make sure the laser is affixed firmly, to avoid vibrations.
Warning labels on the device
Laser radiation
Avoid exposure
To the beam
Laser class 3b/4
Caution of radiation
If cover is removed
Only use indoors
At front opening:
must be applied.
Avoid exposure – laser radiation is emmited.
Read manual
before use
Operation by qualified
personal only
Never direct laser
Beam at people
Never look directly
into beam
Version: Jun-13
3 / 10