Overmax Camspot 3.6 Bedienungsanleitung Seite 14

4. Add device manually (see fig. 5)
The product supports Wi-Fi 2.4 GHz network only, it does not support Wi-Fi 5
EN GHz. Before you configure Wi-Fi, set router parameters. Wi-Fi password must
not include special characters.
•
Make sure the router and camera are close to each other to allow fast
configuration of the device.
•
Connect the mobile device to local Wi-Fi network which the camera will
be connected to, next click „My home". Click the field called „Add device"
and „Add manually", and then select and click „Camspot 3.6".
•
Moving on, enter the correct name of the network and Wi-Fi password.
5. Scan camera with QR code (see fig. 6)
•
Reset the camera by clicking „Reset" (6, fig. 1) to restore factory settings.
Select next step and move on.
•
To pair the camera, scan QR code from the mobile screen through the
camera lens, keep it at a distance of 15-20 cm. Try not to shake the mobile
phone when scanning.
•
When you can hear a „sound", click „I heard a sound". Wait until the device
completes configuration.
•
After adding the device, click „finish" to finish adding the device.