Technical Features - Thonet & Vander GRUB BT Bedienungsanleitung

GRUB BT

TECHNICAL FEATURES

POWER OUTPUT: 54W RMS (24w + 15w x 2)
FREQUENCY RESPONSE: 50Hz - 20kHz
DISTORTION: <0.1% - 1W
S/N: >50dB
SEPARATION: >45dB
ACOUSTIC BOX MATERIAL: Wooden box HDAA
ACOUSTIC BOX SIZE: 185x325 x270mm
DRIVER SIZE: Woofer 5.25"
DRIVER MATERIAL: Cane Lignin
IMPEDANCE/POWER: 4 Ω 30W
SATELLITE SIZE: 185x135x105mm
MID-RANGE SIZE: 2.5"
MID-RANGE MATERIAL: Cane Lignin
IMPEDANCE/POWER: 4 Ω 10W
TWEETER: 0.5"
TWEETER MATERIAL: Polyethylene micro sheets
IMPEDANCE/POWER: 4 Ω 5W
ANTIMAGNETIC SHIELD
CONTROLS: Volume, treble, bass, balance
OUTPUTS: 3.5mm stereo
INPUTS: Bluetooth® / 3.5mm stereo / RCA stereo
ACCESSORIES
_ Audio cable 2 RCA - 3.5mm stereo cable
_ Power cable (IEC 60320 C7)
_ Power cable with tab IEC 60320 C7 - UK plug BS 1363
*Included in certain countries.-
BLUETOOTH® PAIRING MODE
Switch on the device. The speaker will enter pairing mode
automatically. Turn on Bluetooth® in your device and search for
T&V Grub BT™. Connect your device with our speaker and enjoy your
music!
*If there is no pairing, you must turn off and turn on the speaker again to go back to
pairing mode and make a new attempt.
EN
13