Ryobi RP4030 Bedienungsanleitung Seite 10

GB
fr dE ES
oPEraTIon
USInG ThE fUnCTIon BUTTonS
See Figure 4
To store a reading into memory, press the Record button (  ). The LOG icon will
■
light up to show the reading has been logged into memory. Up to 10 readings can
be recorded.
noTE: If the memory is full, the oldest reading will be deleted to add the new
reading.
To recall a reading stored in memory, press the Play button (  ). Pressing the
■
button repeatedly will scroll through all 10 readings.
To clear the memory, press and hold Record and Play together for 4 seconds.
■
The min/max button switches the display from the minimum reading to the
■
maximum reading.
To switch back and forth from Celsius to Fahrenheit, press the ºC button. Recorded
■
temperatures can be read as both Celsius and Fahrenheit.
IT nl PT dK SE fI no rU Pl CZ
English
maInTEnanCE
WarnInG
Always wear eye protection with side shields during maintenance. If operation
is dusty, also wear a dust mask.
WarnInG
To avoid serious personal injury, always remove the battery pack from the
product when cleaning or performing any maintenance.
GEnEral maInTEnanCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WarnInG
Do not at any time let brake fluids, gasoline, petroleum-based products,
penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal
injury.
5
hU ro lV lT EE hr SI SK Gr Tr