Safety Warnings - PROLED POWER BOOSTER 8 A 1-CHANNEL Bedienungsanleitung

，Preface
Thanks for choosing PROLED POWER BOOSTER 8 A 1 -CHANNEL. Before installation and use,
we strongly recommend you to read this manual carefully. If the device has been damaged during
transport, please report this to your supplier immediately. Please don't take any action without
contacting your supplier first
ҟ
Limited Warrenty
In case of quality problems we provide free repair or replacement within one year from the day of
purchase, if this product has been used properly in accordance with the user's manual, except in
following cases:
1. Any defects caused by wrong operation.
2. Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection
and replacement of chips.
3. Any damages due to transportation, vibration etc. after purchase.
4. Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
5. Any damages caused by negligence, inappropriate storing at high temperatures and humidity
or near harmful chemicals.
6. Product has been updated

Safety Warnings

1. Please don't install this booster during thunderstorms, intense magnetic or high-voltage
electrical fields. To reduce the risk of component damage and fire caused by a short circuit,
make sure, that all connections are correct.
2. Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
3. Check voltage and power requirements of the booster as well as the polarity of the power
supply.
4. Never connect any cables while power is on and always assure correct connections to avoid
short circuits before switching on.
5. Never attempt any repairs yourself; otherwise the manufacturer's warranty will be void.
6. For update information please consult your supplier.
1. Product description
PROLED POWER BOOSTER 8 A 1 -CHANNEL allows to increase the power of PWM-signal by 8A.
The booster must be supplied by a single power supply, which has the same voltage as the
connected luminaires. The load of the power supply should be around 20% higher than the
connected load.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany
Users manual / Bedienungsanleitung
www.proled.com