Maestro MR553 Bedienungsanleitung Seite 8

Preparation for work
- Before the first use of accessories, wash them with warm water
and detergents and dry them thoroughly. Wipe the outside of the
mixer case with soft wet cloth, then rub it dry.
- Assure yourself that the switch of operating regimes (3/ Picture1)
is in position «0» - OFF.
- Choose proper accessories for your products.
You can optionally use a mixer complete with a stand or simply
hold the mixer by the handle. To grind the products, use a blender
attachment.
Place the stand on a flat, stable surface. Fix the mixer on the stand
reducer (13 / Fig. 1). Press the release button (7 / Fig. 1) and move
the mixer with the gearbox to the raised position.
- Insert the shank end of each accessory in the hole provided in the
mixer case. Slightly pressing fix the accessories in the holes until it
clicks.
- Be sure that the accessory for mixing dough marked with a ring is
inserted in the left hole (if you see on the site with holes).
Install the bowl (12 / Fig. 1) with the prepared products on the stand
(10 / Fig. 1). Press the fixing button and holding the handle by the
handle, immerse the nozzles with the working part in the bowl with
the product.
- Connect the electric cable plug to the mains.
- Switch on the mixer and choose the required speed with switch (3/
Picture1).
To obtain the maximum speed in any of the modes, press Turbo
button (4 / Fig. 1).
ATTENTION!
Avoid the contact of the liquid being mixed with the mixer case.
8