Operation - Airthereal MA5000 Handbuch

OPERATION

Attaching the Handle
1. Find the handle and two fixing screws in the package.
2. Turn the screwdriver counterclockwise to fix the handle on the machine.
Choosing a location
1. Place the unit at least 15 inches away from TVs, radios, and other electronic products.
Make sure there's plenty of space for Ozone to be exhausted from the machine.
2. Before beginning ozone treatment, thoroughly clean up the source of the odor first.
DISCLAIMER:
Please make sure the operating voltage is the same as shown on the parametric label.
This unit will not function properly using in conjunction with external devices that alter
or convert voltage or frequency of electricity.
Getting Started
1. Insert the power cord into an electrical outlet.
2. Close all windows and doors to completely seal the room. Please note that all ozone
machines have to be used in unoccupied space only.
3. Turn the knob to set a timer or enter the HOLD mode to run continuously. The unit
will start immediately producing ozone, so you should exit the room as quickly as
possible.
7