Operation - Airthereal Pure Morning APH260 Bedienungsanleitung

OPERATION

1. Insert the power cord into an electrical outlet.
Follow these instructions to reduce the risk of serious injury or death and to reduce risk of
damaging the unit.
Please make sure the operating voltage is the same as parametric label.
For American and Canadian users, our product will equipped with a POLARIZED AC PLUG that
will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact qualified personnel to install the proper outlet.
2. Touch-control panel Introduction
Power Button
Turns the unit on
or off.
Power Button
Power on/off. Press the button to process power. The blue breath light of the air quality indicator will
twinkle for 30 seconds. Meanwhile, it starts to detect the PM2.5 value on the LED display.
Fan Speed
Press to start air circulation. 3 fan speeds are available (low, medium, and high, corresponding with
the values 1, 2, and 3 on the LED Display).
Anion
Press to activate/inactivate the Anion Mode.
When the anion function is on, it becomes an air ionizer that uses high voltage to ionize air molecules.
WARNING
Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
7