Operating Instructions; Loading The Bottom Stapler - Signode Josef Kihlberg F561 Betriebsanleitung

6
Fig. 4
Fig. 5
Fig. 6
05.20
OPERATING INSTUCTIONS

6.1 LOADING THE BOTTOM STAPLER

– Always use Josef Kihlberg original staples
JK561-15, JK561-18 or JK561-22.
The correct type of staple is marked on the left side
of the magazine.
– Pull the pusher back and lift up the pusher into its
rear holder.
– Insert staple strips from the rear.
– Do not overload the magazine.
– Release the pusher.
Do not release the pusher directly from
the rear when the magazine is empty,
carefully guide it forward.
Josef Kihlberg F561
7