Basic Operation; Adaptive-Sync; Lndicator Light - Newskill ICARUS IC27F2-V2P Bedienungsanleitung

5.Basic Operation

1. Insert one end of the DP cable into your PC's graphics card. A
HDMI cable may also be used. A HDMI cables is not included.
2. Connect the other end of the cable to the corresponding
connector on your monitor.
3. Connect the power cable to your monitor then connect the other
end to your power source. It is recommended that you use a surge
protector with adequate voltage if a wall outlet cannot be reached
directly.
4. Locate the power button on the monitor and press it to turn the
monitor on.

Adaptive-Sync

This feature is off by default. To activate, you must have hardware with Adaptive-Sync capability, a DP or HDMI cable, and the latest
graphic drivers.
After connecting your computer and monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your
computer. If you do not, you may need to enable the function in your graphics card menu. See your graphics card manufacturer's
documentation for instructions.

6. lndicator Light

Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source, no horizontal or vertical signal has been
detected or voltage is low. Please ensure your computer is on and all video cables are fully
inserted and/or connected.
18
ICARUS SERIES
HDMI Connectors
DP Connector
Indicator Light