Wall Mounting - Newskill ICARUS IC27Q4-V2P Bedienungsanleitung

4. Wall Mounting

Open the package and take out the product with foam still attached. Gently place it on a desktop or table.
1
If the monitor is already attached to the stand, remove the stand.
Press the button to remove the adapter on back of monitor, then tighten the included four NO. 2 screws
2
onto the mounting holes on back of monitor.
NO. 2
Screws x 4
3 Remove the extra parts and the foam covering the monitor, then
install the monitor on the wall, mount, or fixture as desired.
Mount
(not included)
ICARUS SERIES
Button
17