Assembly; Rear Bottom View - AsViva EKC1 Betriebsanleitung

ASSEMBLY

ADULT ASSEMBLY REQUIRED.
The product contains small parts that must be put together by adults.
Children should be kept away from the assembly.
The protective covers and plastic bags should be removed and disposed of before assembly.
- - > Make sure the power switch is in the „OFF" position before assembling the vehicle.
- - > Charge the battery for at least 4 to 6 hours before first use.
ATTACH THE REAR WHEELS
4
5
Remove all parts from the rear axle.
1. Place the gearbox on the rear axle. Make sure that the assignment is correct. The gear unit marked with
„R" goes on the right rear axle - the gear unit marked with „L" goes on the left rear axle.
2. Connect the cable of the gearbox to the cable inside the vehicle
3. Fix the wheel with a Ø12 washer and a lock nut which you also place on the rear axle and tighten
with a wrench.
4. Finally, clip on / snap in the hubcap.
Now repeat the work steps on the other side of the vehicle body.
Attach the Rear Wheels │ 6
2
3

Rear Bottom View

1
27