Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

STORAGE

If it is necessary to store the motorcycle for a long period of time, the following operations are recommended before storage:
Clean the whole vehicle.
Lubricate or grease the components that need it.
Empty the fuel tank. (Take care with the fuel, which is inflammable and toxic)
Empty the sump, removing the old transmission oil and refilling with new oil (If the engine is cold, it is recommended to
start up and leave running for a few minutes to warm up the oil and favour draining).
Cover the exhaust with a plastic bag, protecting it form the elements.
Any unpainted metal parts that could get rusty should be coated with oil.
Avoid the tyres touching the ground by placing a piece of cardboard or similar material under them.
Protect the motorcycle as much as possible form dust and dirt by covering it with a plastic or canvas sheet.
When putting the motorcycle back into service, first:
Remove the plastic protection used.
Check the oil and lubrication of components.
Check the spark plug.
Adjust type pressure to the recommended value.
Fill the petrol tank.
34

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Jtg 250cc 2017Jtg 280cc 2017Jtg 300cc 2017

Inhaltsverzeichnis