Energy-Saving Tips - Gurari GCH I 333 PRIME Montage- Und Bedienungsanleitung

For all work on the cooker hood, even when changing the bulb, the hood has to be de-energized (turn
off circuit breaker or remove the screw fuse from the socket). It is also important to follow the filter
change and cleaning intervals.
If ignored, there is an acute fire hazard due to grease deposits!

Energy-saving tips

Preparation, warming and keeping food warm should always be done in pots or pans with closed lids.
The appliance should be switched off immediately after cooking or, if available, the time-delayed
shutdown be used.
The lighting of the appliance should be switched off after the end of cooking.
Pot sizes should be adapted to the diameter of the cooking zones used.
Use the highest motor speed of the unit only at a high concentration of cooking fumes.
To increase the efficiency of the device, regularly clean the grease filters.
Carbon filters (when used in recirculation mode) should be replaced regularly according to the
manufacturer's specifications.
Parts of the hood
The extractor hood consists of the following parts
1 – Fixing Brackets
2 – Fixing Brackets cover
3 – Electro cable grounded
4 – Metal ropes
5 – Frame
6 – Decorative glass
7 – Control panel
8 – Aluminium filter
9 – Lighting