Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical specifications
power
- power consumption in watts
- Of which lighting (LED)
- Voltage in volts
- Fan volume max.
Dimensions
- Height in cm
- Width in cm
- Depth in cm
- Net weight in kg
specifications
- Connection with safety plug
- 4-level control
- LED lighting (2x3W)
- grease filter (dishwasher-safe)
- Suitable for recirculation
safety instructions
power supply
The connection is made via a fixed cable with earthing contact plug.
In the case of a required permanent connection, the hood may only be installed by an electrician,
registered at the responsible electricity supply authority.
On the installation side, a disconnecting device (this includes fuses, contactors and circuit breaker
acc. VDE 0730, §7, Part 1) has to be used.
minimum distances
Distance to an electric hob
From the electric cooking area to the lower edge of the hood a
minimum distance of 600mm must be maintained.
Distance to the gas hob
Between gas hobs (upper edge of pot carrier) and lower edge of the
hood a minimum distance of 700mm should comply.
Other notes
Please take care, that hotplates in operation are always covered, so the device will not be damaged
by excessive heat.
When deep-frying under an extractor hood, the appliance used for frying has to be supervised at all
time during operation.
Oils contained in deep fryers may self-ignite due to overheating. Using old and dirty oil can lead to
this even more easily.
We point out that overheating can cause a fire. Furthermore, we point out expressly that flambé
under the hood is not allowed.
226W
2x3W
220-240V
1000m³/h
35cm
90cm
30.5cm
19,4kg
Werbung
Inhaltsverzeichnis
