Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for
using your heater. For more details, please refer to
the MANUAL (pages 55 ff.).
Remove all packaging materials (refer to Section A, Fig. A).
2
Fill the removable tank
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment keys
(refer to Section E).
6
Switch off the heater by pressing the
• As a fire precaution, the tank must be filled either
when the heater has been switched off or in
another room than the room where the heater is
installed.
• Always ensure that the tank is closed properly
after filling it at a safe distance from all sources of
heat and open flames (see chapter B).
• The first time the heater is ignited it will smell like
"new" for a short time.
• Store all fuel containers with their original caps
and seals in a cool and dark place.
• Fuel ages. Use new fuel at the start of every
heating season.
• The use of Zibro Extra, Zibro Kristal or Zibro Bio as
a heating fuel assures you that you have a good
quality fuel.
• Before changing brands and/or types of fuel make
sure that the mobile heater first completely
empties all of the remaining fuel inside the
heater.
(refer to Section B, Fig. C).
key ¹ (refer to Section D).
key ¹.
MAIN COMPONENTS
³
Front plate
·
Grid
»
Base plate
Lid for removable
tank
´
Operation panel
²
Removable tank
¶
Fuel gauge
removable tank
º
Vent filter
¾
Thermostat
µ
Plug + cord
¸
Information display
¹
key
Childproof lock
Adjustment keys
(time and
temperature)
Timer
SAVE key
53
Werbung
Inhaltsverzeichnis
