How To Use This Product - SMOK RPM40 Handbuch

How to use this product:

1. Power On:
While the device is off, fast press Fire Key 5 times in 2s to turn
it on. The screen successively displays "SMOK";
2. Vaping:
While the device is on, press Fire Key to vape (it will be forced
to stop working when vaping is longer than 8s one time,
release and press again to vape again);
Quickly press the Fire Key 3 times to lock or unlock the vaping
function.
3. Screen Unlocked Status:
(1) Press UP or DOWN Button to choose your desired wattage;
(2) Press UP and DOWN Button simultaneously to lock or
unlock the wattage adjustment function;
(3) Press Fire key and DOWN Button simultaneously to clear
puff number;
(4) Press Fire key and UP Button simultaneously to choose a
theme color.
4. Power Off: While the device is on, fast press Fire Key 5 times in
2s to turn it off.
-Before Vaping
- Fill the pod completely with e-liquid.
- Take 2-3 puffs while the power is off and without pressing the
Fire Key.
- Begin vaping.
- If e-liquid is sucked through the SMOK product into the
mouth, immediately wash your mouth out completely, seek
medical assistance if needed, then remove the atomizer and
clean the spillage before vaping again.
Instruc�ons on how to fill this product with
e-liquid
• Before the e-liquid in a SMOK product runs out, add e-liquid
into the pod. This should be done before the e-liquid runs
out to avoid burning the coil.
• For instruc�ons on refilling the SMOK product with e-liquid,
users should refer to these instruc�ons below, and the
instruc�ons for bo�les containing e-liquid.
• Users should first ensure that the nozzle a�ached to an
e-liquid bo�le can easily connect – and slot into – the SMOK
pod. The nozzle a�ached to an e-liquid bo�le must be
smaller in diameter than the opening (filling slot) in the
SMOK pod. The opening (filling slot) of the SMOK product is
below. The nozzle of an e-liquid bo�le must be smaller than
the diameter measurements below.
English / 04