eta Essencio Bedienungsanleitung Seite 13

Control button A1
1. when pressed once
2. when pressed twice
3. when pressed three times
– To power the appliance, only use a source of safe low voltage of 5V which
complies with applicable standards (mobile phone chargers with a micro USB
connector with double insulation are suitable) and is able to provide current
of at least 1A or more.
– Do not use USB ports on other devices (e.g. computers, laptops, tablets, mobile
phones, etc.) to power the appliance. Such devices may not be dimensioned for
the current consumption of the appliance and it could damage them.
INSTRUCTIONS FOR USE
1. Place the appliance on a suitable flat surface.
2. Pour water into tank A2 (do not exceed the MAX mark). You can add a few drops of
natural essential oil into the water.
3. Place the cover A6 onto the diffuser, as indicated in Fig. 1.
4. With the USB power cable, connect the appliance to a suitable source.
5. Use the button A1 to set the required mode of operation.
6. As soon as the tank is empty, the LED indicator A5 will be flashing red and the
appliance will switch off automatically.
7. Switch off the appliance after use and disconnect it from the supply source.
– The aroma diffuser can be used in combination with natural essential oils or on its
own with water as a humidifier.
– For using and dosage of essential oils, please follow the manufacturer´s instructions.
– The maximum tank capacity (50ml) will deliver up to approx. 4 hours of operation.
– If the diffuser is not going to be used for more than 1 day, pour the remaining water
out of the tank and rinse the water tank with clean water.
IV. MAINTENANCE
Clean the appliance surface and USB power cable, tank A2 and cover A3 with a wet
cloth. You may also use disinfectants but always follow the instructions provided on the
packaging. Clean the ultrasound converter with a cloth (sponge) and warm soapy water.
For scale removal, use tepid solution with citric acid or vinegar. If you use the appliance
frequently, we recommend that you clean it at least once a week. Be aware of the fact that
a contaminated ultrasound converter will not function properly! Never use aggressive
detergents (e.g. petrol, glass cleaner, furniture polish, thinner) or other solvents to
clean the appliance! After maintenance, let the individual parts dry properly. Never use
sources of heat to dry the plastic parts (such as oven, electric or gas stove).
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with the
instructions of the manufacturer will lead to expiration of the right to guarantee repair!
- appliance ON
- colour light OFF
- appliance OFF
WARNING
Notes
13 / 27
GB