Description; Technical Data - Wolf-Technik WTGDS Serie Bedienungsanleitung

1. Description

2. Technical Data

WTGDS Stainless Steel Cartridge Filter Housing with
casted, hinged cover and socket
WTGDS Stainless Steel Cartridge Filter Housing with casted socket and
hinged cover convince through their compact, space-saving design. And
another advantage is that because of the special design of the socket-bottom
together with the horizontal outlet the housings can be drained completely.
WTGDS cartridge filter housings are manufactured in different assembly
sizes. The assembly sizes differ from one another in the amount and length
of filter cartridges that can be built inside. So there can be built 3, 5 or 8 filter
cartridges in the length from 10" to 40" inside of a housing. An important
feature of the WTGDS cartridge filter housings is the fact, that the position,
type and size of the inlet and outlet connections are variable and are only
manufactured at time of and according to customer specification.
WTGDS Cartridge filter housings can be supplied with filter cartridges with
double open end ( DOE ), with filter cartridges with adapter and flat endcap
( Code 0 ) or with adapter and endcap with fin ( Code 5 ). Options for all sizes
are a pressure-gauge-vent-unit and a magnet insert for preseparation of ferrite
particles.
Material: Housing:
In- / Outlet: position, type and size according to customer
Vent: 2 x ¼" internal thread
Drain: 2 x ½" internal thread
Filter Cartridges: Amount and length see table
Difference pressure: see datasheet of the filter cartridges
Max. operating pressure: 10bar
Max. operating temperature: 95°C
Flow rate: The maximum flow rate correlates to the
stainless steel 1.4404/1.4571
Installations: stainless steel 1.4404/1.4571
O-Ring: Viton ( optional Viton-FEP-
encapsulated, EPDM, Silicone )
Screw:
specification
nominal diameter of the housing connection and
the characteristic curve of the flow rate of the
chosen filter element.
13