Declaration Of Incorporation; Environmental Operating Limits; Overall Dimensions; Residual Risks - Annovi Reverberi RTX Serie Betriebs Und Installationsanleitung

Residual risks

Even if the safety regulations and information provided in the manual are complied with, the residual risks described
in the declaration of incorporation still apply when the pump is in operation.

Technical data

The technical and performance data are stated on the cover.

Overall dimensions

The illustrations showing the overall dimensions are provided in the annexes.

Environmental operating limits

The machine operates correctly at an ambient temperature between 10 and 35 °C.

Declaration of incorporation

The illustration shows a copy of the declaration of incorporation, the original of which is issued by the manufacturer
together with this manual.
Declares under its own responsability that the Partly Completed Machinery :
Description : High pressure pump
Serial number : XXXX
Year of manufacture : XXXX
Complies with the following essential safety requirements specified in Annex I of Dir. 2006/42/CE :
1.1.2-1.1.3-1.1.5-1.3.1-1.3.2-1.3.3-1.3.4-1.5.4-1.7.1-1.7.2-1.7.4-1.7.4.1-1.7.4.2
It declares also that the relevant technical documentation has been compiled in accordance with
the part B of Annex VII and that it undertakes to transmit, in response to a reasoned request by
the national authorities, relevant information about the partly completed machinery in paper or
electronic format.
Prohibiting the put into service of the partly completed machinery until the final machinery
into which it is to be incorporated has been declared in conformity (where appropriate) with the
provisions of the 2006/42/CE Directive and subsequent amendments.
The following Harmonized Standards have been consulted for the compliance verification :
The person authorized to compile the relevant technical documentation:
English language
TECHNICAL INFORMATION
DECLARATION OF INCORPORATION
Directive 2006/42/EC (Annex II B) and subsequent amendments
The Manufacturer
Annovi Reverberi S.p.A.
Via Martin Luther King, 3 - 41122 – Modena – Italia
Modena
20/03/2017
Annovi Reverberi S.p.A. Via Martin Luther King, 3 – 41122 Modena (MO) – Italia
Tel. +39 059 414 411 – Fax +39 059 253 505 – E-Mail : infoar@annovireverberi.it – Web : www.annovireverberi.it
EN 809: 2009
Reverberi Ing. Stefano
Managing Director
26
2
Use and Installation