Herunterladen Diese Seite drucken
Vimar Eikon 20463 Bedienungsanleitung
Vimar Eikon 20463 Bedienungsanleitung

Vimar Eikon 20463 Bedienungsanleitung

Vertikaler elektronischer badge-schalter

Werbung

Eikon
Arké
20463
19463-19463.AB
Interruttore elettronico a badge verticale, uscita a relè in scambio 4 A 250 V~
N.O. (NON SELV), alimentazione 120-230 V~ 50-60 Hz, illuminazione della tasca
per individuazione al buio, trimmer di regolazione del tempo di spegnimento
dopo l'estrazione della card - 2 moduli. Fornito senza carta ISO (badge).
La soluzione abbinata alla serie civile Arké è disponibile anche in versione antibatterica
(art. 19463.AB). Il trattamento antibatterico garantisce l'igiene del prodotto tramite
l'azione di ioni di argento (AG+) e previene la formazione e la proliferazione di germi,
batteri, virus e funghi. Affinché l'azione antibatterica sia efficace e per il mantenimento
dell'igiene si raccomanda di procedere con la normale e regolare pulizia del prodotto.
PRINCIPALI CARATTERISTICHE.
• Alimentazione: 120-230 V~ ±10% 50-60 Hz
• Uscita: a relè con contatto pulito in scambio 4 A 250 V~ cos φ 1 N.O. (NO SELV)
• Assorbimento tipico:
- 120 V~ 50-60 Hz: 25 mA
- 230 V~ 50-60 Hz: 40 mA
• Led bianco di illuminazione della tasca per individuazione al buio.
• Trimmer per la regolazione del tempo di spegnimento dopo l'estrazione della card: 1
s - 4 min.
• Carichi comandabili a 120-230 V~ 50-60 Hz (NON SELV):
- carichi resistivi: 4 A (20.000 cicli);
- motori cos φ 0,6: 2 A (20.000 cicli).
• Temperatura di funzionamento: -5 °C +35 °C (uso interno)
REGOLE DI INSTALLAZIONE.
• L'installazione deve essere effettuata da personale qualificato con l'osservanza delle di-
sposizioni regolanti l'installazione del materiale elettrico in vigore nel paese dove i prodotti
sono installati.
• Il circuito di alimentazione delle uscite a relè deve essere protetto contro le sovracorrenti
da un dispositivo, fusibile con potere di interruzione nominale di 1500 A o un interruttore
automatico tipo C, con corrente nominale non superiore a 10 A.
• Per la regolazione del trimmer utilizzare un cacciavite isolato a lama stretta, aven-
do preventivamente tolto tensione dall'impianto.
IMPORTANTE:
• L'installazione va effettuata esclusivamente su supporti e placche 2 moduli e 2
moduli centrali.
• Cablare il modulo prima di agganciarlo al supporto.
CONFORMITÀ NORMATIVA.
Direttiva BT. Direttiva EMC. Norma EN 60669-2-1.
Regolamento REACh (UE) n. 1907/2006 – art.33. Il prodotto potrebbe contenere tracce
di piombo.
RAEE - Informazione agli utilizzatori
Il simbolo del cassonetto barrato riportato sull'apparecchiatura o sulla sua confezione indica che il prodotto alla fine della propria vita utile deve
essere raccolto separatamente dagli altri rifiuti. L'utente dovrà, pertanto, conferire l'apparecchiatura giunta a fine vita agli idonei centri comunali
di raccolta differenziata dei rifiuti elettrotecnici ed elettronici. In alternativa alla gestione autonoma, è possibile consegnare gratuitamente
l'apparecchiatura che si desidera smaltire al distributore, al momento dell'acquisto di una nuova apparecchiatura di tipo equivalente. Presso
i distributori di prodotti elettronici con superficie di vendita di almeno 400 m
acquisto, i prodotti elettronici da smaltire con dimensioni inferiori a 25 cm. L'adeguata raccolta differenziata per l'avvio successivo dell'ap-
parecchiatura dismessa al riciclaggio, al trattamento e allo smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti
negativi sull'ambiente e sulla salute e favorisce il reimpiego e/o riciclo dei materiali di cui è composta l'apparecchiatura.
Upright electronic badge switch, change-over relay output 4 A 250 V~ N.O.
(NON SELV), power supply 120-230 V~ 50-60 Hz, slot lighting for location in the
dark, trimmer for regulating switch-off time after removing the card - 2 mod-
ules. Supplied without ISO card (badge).
The solution combined with the Arké residential series is also available in antibacterial
version (art. 19463.AB). The antibacterial treatment ensures full hygiene thanks to
the action of the silver ions (AG+), which prevent the formation and spread of germs,
bacteria, viruses and fungi. To maintain the hygiene and effectiveness of its antibacte-
rial action, clean the product regularly.
MAIN CHARACTERISTICS.
• Power supply: 120-230 V~ ±10% 50-60 Hz
• Output: relay with clean change-over contact 4 A 250 V~ cos φ 1 N.O. (NO SELV)
• Typical absorption:
- 120 V~ 50-60 Hz: 25 mA
- 230 V~ 50-60 Hz: 40 mA
• White LED lighting the slot for location in the dark.
• Trimmer for regulating switch-off time after removing the card: 1 s - 4 min.
• Controllable loads at 120-230 V~ 50-60 Hz (NON SELV):
- resistive loads: 4 A (20,000 cycles);
- motors cos φ 0.6: 2 A (20,000 cycles).
• Operating temperature: -5°C to +35°C (indoor use)
INSTALLATION RULES.
• Installation should be carried out by qualified personnel in compliance with the current
regulations regarding the installation of electrical equipment in the country where the
products are installed.
49401030B0 01 2007
Plana
14463
è inoltre possibile consegnare gratuitamente, senza obbligo di
2
• The relay output power supply circuit must be protected against overcurrents by install-
ing a device, a fuse with a rated breaking capacity of 1500 A or a type-C circuit breaker,
with rated current not exceeding 10 A.
• To adjust the trimmer, switch off the power to the system and use an isolated
narrow-blade screwdriver.
IMPORTANT:
• Installation must only be performed on mounting frames and cover plates with 2
modules and 2 central modules.
• Wire the module before hooking it onto the mounting frame.
REGULATORY COMPLIANCE.
LV directive. EMC directive. Standard EN 60669-2-1.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste
at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new
one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least
400 m
, if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or
2
its subsequent recycling, helps avoid the potential negative effects on the environment and people's health, and encourages the re-use and/
or recycling of the construction materials.
Interrupteur électronique à badge vertical, sortie à relais avec contact inverseur
4 A 250 V~ N.O. (NON SELV), alimentation 120-230 V~ 50-60 Hz, éclairage de la
poche pour localisation dans l'obscurité, variateur de réglage du temps d'ex-
tinction après l'extraction de la carte - 2 modules. Livré sans carte ISO (badge).
La solution associée à la série résidentielle Arké est également disponible en version
antibactérienne (art. 19463.AB). Le traitement antibactérien par ions d'argent (AG+)
garantit l'hygiène des composants. Il prévient la formation et la prolifération des
germes, des bactéries, des virus et des champignons. Pour une bonne efficacité de
l'action antibactérienne, nous vous conseillons de nettoyer régulièrement les compo-
sants de votre installation.
PRINCIPALES CARACTÉRISTIQUES.
• Alimentation : 120-230 V~ ±10% 50-60 Hz
• Sortie : à relais avec contact inverseur vierge 4 A 250 V~ cos φ 1 N.O. (NO SELV)
• Absorption typique :
- 120 V~ 50-60 Hz : 25 mA
- 230 V~ 50-60 Hz : 40 mA
• Led blanche d'éclairage de la poche pour localisation dans l'obscurité.
• Variateur pour le réglage du temps d'extinction après l'extraction de la carte : 1 s - 4 min.
• Charges pilotables à 120-230 V~ 50-60 Hz (NON SELV) :
- charges résistives : 4 A (20 000 cycles) ;
- moteurs cosφ 0,6 : 2 A (20 000 cycles).
• Température de fonctionnement : -5 °C +35 °C (usage intérieu
CONSIGNES D'INSTALLATION
• L'installation doit être confiée à des personnel qualifiés et exécutée conformément aux dis-
positions qui régissent l'installation du matériel électrique en vigueur dans le pays concerné.
• Le circuit d'alimentation des sorties à relais doit être protégé contre les surintensités
par un dispositif, fusible avec pouvoir d'interruption nominal de 1500 A ou interrupteur
automatique type C, avec courant nominal non supérieur à 10 A.
• Pour régler le variateur, utiliser un tournevis étroit et isolé et s'assurer d'avoir mis
le circuit hors tension.
IMPORTANT :
• L'installation doit avoir lieu exclusivement sur des supports et des plaques 2 mo-
dules et 2 modules centraux.
• Câbler le module avant de l'accrocher au support.
CONFORMITÉ AUX NORMES
Directive BT Directive CEM Norme EN 60669-2-1.
Règlement REACH (EU) n° 1907/2006 – art.33. Le produit pourrait contenir des traces de plomb.
DEEE - Informations pour les utilisateurs
Le symbole du caisson barré, là où il est reporté sur l'appareil ou l'emballage, indique que le produit en fin de vie doit être collecté
séparément des autres déchets. Au terme de la durée de vie du produit, l'utilisateur devra se charger de le remettre à un centre de collecte
séparée ou bien au revendeur lors de l'achat d'un nouveau produit. Il est possible de remettre gratuitement, sans obligation d'achat, les
produits à éliminer de dimensions inférieures à 25 cm aux revendeurs dont la surface de vente est d'au moins 400 m
appropriée pour l'envoi successif de l'appareil en fin de vie au recyclage, au traitement et à l'élimination dans le respect de l'environnement
contribue à éviter les effets négatifs sur l'environnement et sur la santé et favorise le réemploi et/ou le recyclage des matériaux dont
l'appareil est composé.
Interruptor electrónico de "badge" con salida de relé en intercambio 4 A 250
V~ N.O. (NO SELV), alimentación 120-230 V~ 50-60 Hz, iluminación de la ranura
para la identificación en la oscuridad, trimmer para regular el tiempo de apa-
gado tras extraer la tarjeta - 2 módulos. Suministrado sin tarjeta ISO (badge).
La solución combinada con la serie civil Arké está disponible también en la versión
antibacteriana (Art. 19463.AB). El tratamiento antibacteriano garantiza la higiene del
producto gracias a la acción de iones de plata (AG+) y previene la formación y la
proliferación de gérmenes, bacterias, virus y hongos. Para la eficacia de la acción
antibacteriana y mantener la higiene, se recomienda limpiar normal y periódicamente
el producto.
r)
2
. La collecte séparée
Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com

Werbung

loading

Inhaltszusammenfassung für Vimar Eikon 20463

  • Seite 1 Viale Vicenza, 14 36063 Marostica VI - Italy www.vimar.com 49401030B0 01 2007...
  • Seite 2 WICHTIGER HINWEIS: • Die Installation hat ausschließlich auf 2-Modul-Halterungen und -Abdeckrahmen mit 2 mittleren Modulen zu erfolgen. • Das Modul ist vor dem Einrasten in die Halterung zu verkabeln. Viale Vicenza, 14 36063 Marostica VI - Italy www.vimar.com 49401030B0 01 2007...
  • Seite 3 Accrocher le couvercle au module • Sujetar la tapa al módulo Regelung des Trimmers • Ρύθμιση του trimmer Den Deckel auf das Modul einrasten • Συνδέστε το καπάκι στη μονάδα Viale Vicenza, 14 36063 Marostica VI - Italy www.vimar.com 49401030B0 01 2007...
  • Seite 4 Carico ON • Load ON • Charge ON Carga OFF • Last OFF • Θορτίο OFF Carga ON • Last ON • Θορτίο ON Carga ON • Last ON • Θορτίο ON 4 min Viale Vicenza, 14 36063 Marostica VI - Italy www.vimar.com 49401030B0 01 2007...

Diese Anleitung auch für:

Arke 19463.abArke 19463Plana 14463