Beper 40.360 Betriebsanleitung Seite 8

GENERAL SAFETY ADVICE
READ THE OPERATING INSTRUCTIONS CAREFULLY BE-
FORE FIRST USE OF THE APPLIANCE.
Read the following instructions carefully, since they give you
useful safety information about installation, use and mainte-
nance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is in-
tact, with special attention to the supply cable. The elements
of the packing (plastic bags, polystyrene, etc) do not have to
be accessible to the children, in order to preserve them from
danger sources.
It is recommended not to throw these packing material in the
domestic waste, but to deliver them to the appropriate station
of collection or destruction refusals, asking eventually infor-
mation to the manager of the Sanitation Department of your
own municipality.
Before connecting the appliance make sure that the mains
voltage corresponds to the data specified on the label.
If the plug does not suit the socket, let it be replaced with
another suitable plug by qualified personnel only, which shall
also ensure that the section of the socket cables is suitable for
your appliance power absorption.
Never pull the supply cord to unplug the appliance.
Make sure that the supply cord never comes into contact with
hot or cutting surfaces
Do not use this appliance if the supply cord is damaged. In
case of damage, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid
a hazard.
Only connect this appliance on alternating current
Generally, the use adaptors multiple plugs and/or extensions
is not recommended; should they be necessary, please use
only simple or multiple adaptors and extensions in compliance
with the safety rules in force, making sure that the capacity
8