Control Panel - Chal-Tec ACO-CTR1 Bedienungsanleitung

1. When using the appliance, make sure that it is on a flat and stable surface. Damage may occur if it is
placed on an incline or decline, and put the ice box into water tank:
the plug directly into a standard AC socket-outlet. Be sure plug fits tightly into outlet.
2. Turn the timer knob to ON position
3. Press the LO/MI/HI button to set the desired fan speed (Low/ Medium/High).
4. SPEED button
Press the SPEED button to set the desired fan speed (Low/ Medium/ High).
As per the following sequence: MI
speed pilot lamp will be on during the fan operating.
5. VANE button
If you want to enlarge blast area in your room, press the vane button, the fan will blast your room in large
scope; the vane light will be illuminated. To stop vane, just press the vane button again, the vane pilot light
will go out. Moving the horizontal louvers either up or down can make further wind direction enhancements.

CONTROL PANEL

INSTRUCTIONS FOR USE
1.Rotate the Small knob updown
3.Add the water from here into water
tank this
4.Put ices into ice
2.Pull out the water tank
HI
basket
5.Put the ice box also into
water
Lo MI. The fan speed selecting can be circulated and the
2. Insert