Operation Panel - Chal-Tec elektronik-star ACO-MCH2 Bedienungsanleitung

1. When using the appliance, make sure that it is on a flat and stable surface. Damage may occur if it is
placed on an incline or decline, and put the ice box into water tank:
the plug directly into a standard AC socket-outlet. Be sure plug fits tightly into outlet.
2. Turn the timer knob to ON position
3. Press the LO/MI/HI button to set the desired fan speed (Low/ Medium/High).
4. If you want to enlarge blast area in your room, press the VANE button, the fan will blast your room in large
scope. To stop oscillating, just press the VANE button again. Moving the horizontal louvers either up or down
can make further wind direction enhancements.
5. Cool button
NOTE: The function of Cool can be set only under the fan operating.
1) Before operating the unit in Cool mode, make sure that water tank is properly fixed. Then proceed to add
clean water into the water tank. While adding the water, make sure that you keep an eye on the water level
indicator to make sure that you do not OVER or UNDER FILL the unit. Press the button Cool after you have
added the water and the unit should commence to blow cooler air.

OPERATION PANEL

INSTRUCTIONS FOR USE
1.Rotate the Small knob updown
3.Add the water from here into water
tank this
4.Put ices into ice
2.Pull out the water tank
basket
5.Put the ice box also into
water
2. Insert